Panasonic Control FPWIN Pro
All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 7.3
- ATTENTION: Low skill level to exploit
- Vendor: Panasonic
- Equipment: Control FPWIN Pro
- Vulnerabilities: Heap-based Buffer Overflow, Type Confusion
2. RISK EVALUATION
Successful exploitation of these vulnerabilities could crash the device and allow remote code execution.
3. TECHNICAL DETAILS
3.1 AFFECTED PRODUCTS
The following versions of Control FPWIN Pro, a PLC programming software, are affected:
- FPWIN Pro Version 188.8.131.52 and prior
3.2 VULNERABILITY OVERVIEW
Attacker-created project files loaded by an authenticated user can cause heap-based buffer overflows, which may lead to remote code execution.
Attacker-created project files loaded by an authenticated user can trigger incompatible type errors because the resource does not have expected properties. This may lead to remote code execution.
- CRITICAL INFRASTRUCTURE SECTORS: Commercial Facilities, Critical Manufacturing, and Food and Agriculture
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Japan
9sg Security Team working with Trend Micro’s Zero Day Initiative reported these vulnerabilities to NCCIC.
Panasonic recommends users upgrade to FPWIN Pro Version 184.108.40.206 or newer, which can be downloaded at the following link:
For more information about these issues or other vulnerabilities in Panasonic products, please contact the Panasonic Product Security Incident Response Team:
NCCIC recommends users take the following measures to protect themselves from social engineering attacks:
- Do not click web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
No known public exploits specifically target these vulnerabilities.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.