PHOENIX CONTACT RAD-80211-XD
All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 9.9
- ATTENTION: Exploitable remotely/low skill level to exploit
- Vendor: Phoenix Contact
- Equipment: RAD-80211-XD
- Vulnerability: Command Injection
2. RISK EVALUATION
Successful exploitation of this vulnerability could allow an attacker to execute system level commands with administrative privileges.
3. TECHNICAL DETAILS
3.1 AFFECTED PRODUCTS
According to Phoenix Contact, the following products are affected:
- RAD-80211-XD (2885728), and
- RAD-80211-XD/HP-BUS (2900047)
3.2 VULNERABILITY OVERVIEW
A WebHMI utility may be exploited by any logged-in user, allowing the execution of arbitrary OS commands on the server. This provides the opportunity for a command injection attack.
- CRITICAL INFRASTRUCTURE SECTORS: Communications, Critical Manufacturing, Information Technology
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Germany
Maxim Rupp (RuppIT) working with Phoenix Contact and CERT@VDE reported this vulnerability to NCCIC.
Phoenix Contact recommends the following:
- Users using Phoenix Contact 80211-XD radio modules are recommended to operate the devices in closed networks or protected with a suitable firewall.
- The affected products have been removed from active maintenance due to obsolescence. For this reason, it is recommended that concerned users upgrade to the active FL WLAN product line.
- For detailed information on recommendations for measures to protect network-capable devices, please refer to the application note: https://www.phoenixcontact.com/assets/downloads_ed/local_pc/web_dwl_technical_info/ah_en_industrial_security_107913_en_01.pdf
Please see VDE-2019-007 at the following location for more details:
NCCIC recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize that VPN is only as secure as the connected devices.
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
No known public exploits specifically target this vulnerability.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.