Magnetrol HART DTM Vulnerability
All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
Alexander Bolshev of Digital Security has identified an improper input validation vulnerability in the CodeWrights GmbH HART Device Type Manager (DTM) library extension utilized by some Magnetrol products. CodeWrights GmbH has updated its software library to mitigate this vulnerability. Magnetrol has integrated this update and released its revised library extensions.
The following products can use the vulnerable HART DMT library extension and are affected:
- Eclipse Model 705 Guided Wave Radar transmitter (Firmware Version 3.x),
- Echotel Model 355 Ultrasonic transmitter (Firmware Version 1.x),
- Model R82 Pulse Burst Radar Transmitter (Firmware Versions 1.x and 2.x), and
- Thermatel Model TA2 Thermal Mass Flowmeter (Firmware Version 2.x).
The vulnerability causes the HART DTM component to crash and also causes the HART service to stop responding. No loss of information or loss of control or view by the control system results from an attacker successfully exploiting this vulnerability.
Impact to individual organizations depends on many factors that are unique to each organization. NCCIC/ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.
Magnetrol is a US-based company that maintains offices in several countries around the world, including the US, Belgium, Brazil, China, and the United Arab Emirates.
The affected products are field devices using HART protocol. According to Magnetrol, these products are deployed across multiple critical infrastructure sectors worldwide.
IMPROPER INPUT VALIDATIONaBy sending specially crafted response packets to the 4 mA to 20 mA current loop, the DTM component stops functioning, and the FDT Frame application becomes unresponsive.
This exploit is possible from any adjacent network between the FDT/DTM frame application and the HART transmitter on the 4 mA to 20 mA current loop.
EXISTENCE OF EXPLOIT
No known public exploits specifically target this vulnerability.
Crafting a working exploit for this vulnerability would be difficult. Compromised access at any point between the HART transmitter and Frame Application with DTM will allow a malicious user to unencapsulate, modify, re-encapsulate and send malicious packets. This exploit requires timing the spoofed response to crash the FDT/DTM components. This increases the difficulty of a successful exploit.
Magnetrol has updated the software library impacted. The update can be downloaded here:
ICS-CERT encourages asset owners to take additional defensive measures to protect against this and other cybersecurity risks.
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize that VPN is only as secure as the connected devices.
ICS-CERT also provides a section for control systems security recommended practices on the ICS-CERT web page at: http://ics-cert.us-cert.gov/content/recommended-practices. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies. ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
Additional mitigation guidance and recommended practices are publicly available in the ICS‑CERT Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies, that is available for download from the ICS-CERT web site (http://ics-cert.us-cert.gov/).
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
- a. CWE-20: Improper Input Validation, http://cwe.mitre.org/data/definitions/20.html, web site last accessed January 27, 2015.
- b. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-9191, web site last accessed January 27, 2015.
- c. CVSS Calculator, http://nvd.nist.gov/cvss.cfm?version=2&vector=AV:A/AC:H/Au:N/C:N/I:N/A:P, web site last accessed January 27, 2015.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.