U.S. Flag Official website of the Department of Homeland Security
U.S. Department of Homeland Security Seal. ICS-CERT. Industrial Control Systems Cyber Emergency Response Team.
TLP:WHITE

Advisory (ICSA-12-341-01)

GE Proficy HMI/SCADA Cimplicity Integer Overflow

Original release date: January 10, 2013 | Last revised: September 06, 2018

Legal Notice

All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.



OVERVIEW

This updated advisory is a follow-up to the original ICS-CERT Advisory titled ICSA-12-341-01P—GE PROFICY HMI/SCADA CIMPLICITY INTEGER OVERFLOW that was published December 06, 2012, to the US-CERT secure Portal library.

Researcher Kuang-Chun Hung of Information and Communication Security Technology Center (ICST) has identified an improper input validation vulnerability in GE’s Intelligent Platforms Proficy HMI/SCADA—Cimplicity. This vulnerability could lead to a possible denial of service (DoS).

GE has produced an updated product version that ICST has validated. ICST confirms that the product update resolves the reported vulnerability.

This vulnerability can be exploited remotely.

AFFECTED PRODUCTS

The following products and versions are affected:

  • Proficy HMI/SCADA – CIMPLICITY: Version 4.01 and greater, and
  • Proficy Process Systems with CIMPLICITY.

Note: Proficy HMI/SCADA—Cimplicity Versions 4.0 and prior are not affected by this vulnerability.

IMPACT

If exploited, this vulnerability could allow an unauthenticated remote attacker to cause the CIMPLICITY built-in Web server to crash or to stop responding to requests.

Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.

BACKGROUND

According to GE, Proficy HMI/SCADA—Cimplicity is a Client/Server based human-machine interface/supervisory control and data acquisition (HMI/SCADA) application deployed across multiple industries.

VULNERABILITY CHARACTERIZATION

VULNERABILITY OVERVIEW

Improper Input Validation Vulnerability1

A vulnerability exists in the way that the CIMPLICITY built-in Web server (CimWebServer.exe) processes incoming HTTP traffic because of insufficient input validation. The CIMPLICITY built-in Web server is not enabled by default. When enabled, it listens on Port 80 TCP by default.

An attacker can exploit the vulnerability by sending malformed HTTP requests to the listening service. The attack does not require authentication and can be conducted remotely.

CVE-2012-46892 has been assigned to this vulnerability. A CVSS v2 base score of 7.1 has been assigned; the CVSS vector string is (AV:N/AC:M/Au:N/C:N/I:N/A:C)

VULNERABILITY DETAILS

Exploitability

This vulnerability could be exploited remotely.

Existence of Exploit

No known public exploits specifically target this vulnerability.

Difficulty

An attacker with a low skill would be able to exploit this vulnerability.

MITIGATION

GE has released a security advisory and patches to address this issue.

Patches for versions of CIMPLICITY prior to Version 8.0 will not be created. GE recommends customers who are unable to patch or upgrade consider the recommendations below.

GE has provided the following workaround recommendations that eliminate the need to use the vulnerable component:

Option 1: Disable the CIMPLICITY built-in Web server if it is not in use.

GlobalView, WebView, and ThinView expose the existing functionality of the CIMPLICITY HMI application so that it can be viewed via a Web browser.

If this functionality is not required, Web-based access can be disabled by the following process:

  1. Open CIMPLICITY Options.
  2. Select the “WebView/ThinView” tab.
    1. a. Uncheck the “Use built-in Web server” option.
    2. b. Uncheck the “Start at boot time” option.
  3. Select the “GlobalView” tab (if GlobalView is installed).
    1. Uncheck the “Use built-in Web server” option.
    2. Uncheck the “Start at boot time” option.
  4. Click “OK.”

Option 2: Use an alternate Web server to host GlobalView, WebView, or ThinView.

The CIMPLICITY built-in Web server can be replaced with a third-party Web application server such as Microsoft IIS.

To configure GlobalView, WebView, or ThinView to use IIS:

  1. Clear the “Use built-in Web server” check box on the WebView/ThinView and GlobalView tabs of the CIMPLICITY Options dialog box.
  2. Copy the ProwlerClient.jar file from the WebPages directory of your CIMPLICITY installation to an IIS Web server directory.
  3. In the WebView/ThinView or GlobalView tab of CIMPLICITY Options, click on “Create a Web Page” to create an HTML file for your Web server. Use the “Browse Page” button to navigate to the directory where you’d like to save the page.

Important: If you would like to publish the Web page to Microsoft IIS, make sure you save the Web page to an IIS Web directory. By default, this is C:\InetPub\wwwroot or a subdirectory, but it could be another location depending on your IIS configuration. You can save the page by clicking the “Browse Page” button and navigating to the directory or by saving the file to another location and copying it to an IIS directory later.

The vulnerable service (CimWebServer.exe) will still run on the system in the “Option 2” configuration. However, because it is no longer listening on a port that is processing HTTP traffic, the vulnerability is not exposed.

As with any third-party product, ensure that your IIS Web server is up to date with the latest security patches and follow any secure configuration recommendations from the vendor.

ICS-CERT encourages asset owners to take additional defensive measures to protect against this and other cybersecurity risks.

  • Minimize network exposure for all control system devices. Critical devices should not directly face the Internet.
  • Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
  • When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPN is only as secure as the connected devices.

ICS-CERT also provides a section for control systems security recommended practices on the ICS-CERT Web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies. ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to taking defensive measures.

Additional mitigation guidance and recommended practices are publicly available in the ICS-CERT Technical Information Paper, ICS-TIP-12-146-01A—Targeted Cyber Intrusion Detection and Mitigation Strategy.

Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.


Contact Information

For any questions related to this report, please contact the NCCIC at:

Email: NCCICCUSTOMERSERVICE@hq.dhs.gov
Toll Free: 1-888-282-0870

For industrial control systems cybersecurity information:  http://ics-cert.us-cert.gov 
or incident reporting:  https://ics-cert.us-cert.gov/Report-Incident?

The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.

Was this document helpful?  Yes  |  Somewhat  |  No

Back to Top