RuggedCom Weak Cryptography for Password Vulnerability (Update A)
All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
--------- Begin Update A Part 1 of 2 --------
This is an update to the original advisory titled ICSA-12-146-01—RuggedCom Weak Cryptography for Password Vulnerability that was published May 25, 2012, on the ICS-CERT Web page. Independent researcher Justin W. Clarke identified a default backdoor user accounta, b,c with a weak password encryption vulnerability in the RuggedCom Rugged Operating System (ROS). This vulnerability can be remotely exploited. Exploits that target this vulnerability are known to be publicly available.
Mr. Clarke provided this information to both CERT/CC and ICS-CERT. ICS-CERT coordinated a mitigation strategy with RuggedCom, a Siemens company. RuggedCom has produced new firmware versions that resolve the reported vulnerability.
Previous versions of this document erroneously stated that ICS-CERT had confirmed that the patch resolves the vulnerability. ICS-CERT has tested one version of the patched firmware (v3.10.1) and can confirm that the public exploits no longer work on the patched versions.
--------- End Update A Part 1 of 2 ----------
This advisory is a follow-up to ICS-ALERT-12-116-01A RuggedCom Weak Cryptography for Password that was published April 26, 2012, on the ICS-CERT Web page.
RuggedCom RuggedSwitch or RuggedServer devices are affected using the following versions of ROS:
- 3.2.x and earlier, and
- 3.3.x and above.
An attacker can use a simple publicly available script to generate the default password and gain administrative access to the unit.
Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.
RuggedCom makes network equipment that is intended for deployment in harsh environments. Their products can be found in applications such as traffic control systems, railroad communications systems, power plants, electrical substations, and military sites. Beyond Layer 2 and Layer 3 networking, these devices also provide serial-to-IP conversion in SCADA systems, and they support MODBUS and DNP3 protocols.
Weak Cryptography for Passwordsd
An undocumented backdoor account exists within all previously released versions of RuggedCom’s ROS. The username for the account, which cannot be disabled, is “factory,” and its password is dynamically generated based on the device’s MAC address.
This vulnerability is exploitable remotely.
Existence of Exploit
Public exploits are known to target this vulnerability.
An attacker with a low skill level would be able to exploit this vulnerability.
--------- Begin Update A Part 2 of 2 --------
Versions 3.10.1, 3.9.3, 3.8.5, and 3.7.9 of the ROS firmware with security-related fixes are now available and can be obtained from RuggedCom technical support at firstname.lastname@example.org.
ROS v3.11.x, a new firmware release containing additional functionality as well as the same security fixes, will be released within the next few weeks; RuggedCom will release a product bulletin1 to notify customers when it is available.
--------- End Update A Part 2 of 2 ----------
To address security issues, the following changes are included in all the new ROS firmware versions:
- removal of factory account as referenced in ICSA -12-146-01 and NERC Alert A-2012-05-07-01,
- change default condition of insecure communication services to disabled,
- improval of security for user account password storage,
- detection and alarm for weak password strength, and
- removal of device information from standard login banner.
Note: These new versions of the ROS firmware remove the factory account and the associated security vulnerability. Customers using these new versions of the firmware should take special care not to lose the user defined password to a device’s administrative account as recovering from a lost administrative password will now require physical access to the device to reset the passwords.
RuggedCom recommends that customers using ROS versions older than v3.7 upgrade to a newer version. If this is not possible, RuggedCom has indicated that they will address updates to older versions of the firmware on a case-by-case basis.
Siemens has issued security advisory “SSA-826381: Multiple Security Vulnerabilities in RuggedCom ROS-based Devices” regarding this vulnerability. It can be found on the Siemens ProductCERT advisory Web page.
ICS-CERT encourages asset owners to take additional defensive measures to protect against this and other cybersecurity risks.
- Minimize network exposure for all control system devices. Critical devices should not directly face the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPN is only as secure as the connected devices.
The Control Systems Security Program (CSSP) also provides a section for control systems security recommended practices on the CSSP web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
- a. RuggedCom Backdoor Accounts, http://seclists.org/fulldisclosure/2012/Apr/277, Web site last accessed June 18, 2012.
- b. US-CERT Vulnerability Note, http://www.kb.cert.org/vuls/id/889195, Web site last accessed June 18, 2012.
- c. NERC Advisory, http://www.nerc.com/fileUploads/File/Events%20Analysis/A-2012-05-07-01_R..., Web site last accessed June 18, 2012.
- d. CWE, http://cwe.mitre.org/data/definitions/261.html, Web site last accessed June 18, 2012.
- 1. Latest news on ROS Device Security Issue, http://www.ruggedcom.com/productbulletin/ros-security-page/, Web site last accessed June 18, 2012.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.